When charging the robot, does it always run out by itself, turn around and go back?
Updated on 2024/05/08
(1) The robot is equipped with an autonomous reconnection function for power failure.
(2) When the following three situations occur: 1. slight vibration causes the charging pole piece is not fully contacted; 2. unstable voltage causes insufficient charging voltage; 3. signal interference causes charging signal acquisition failure, the robot will exit the base station to re-dock to the base station, to ensure that the charging is continuous and stable.
(3) If you still can't troubleshoot using the above cases, please contact a little after-sales service department.
(2) When the following three situations occur: 1. slight vibration causes the charging pole piece is not fully contacted; 2. unstable voltage causes insufficient charging voltage; 3. signal interference causes charging signal acquisition failure, the robot will exit the base station to re-dock to the base station, to ensure that the charging is continuous and stable.
(3) If you still can't troubleshoot using the above cases, please contact a little after-sales service department.